ESP415D1Features & BenefitsVery low let-through voltage (enhanced protection to BS EN 62305) between all sets of conductors (phase to neutral, phase to earth, neutral to earth – Full Mode protection)Full mode design capable of handling partial lightning currents as well as allowing continual operation of protected equipmentRepeated protection in lightning intense environmentsInnovative multiple thermal disconnect technology for safe disconnection from faulty or abnormal supplies (without compromising protective performance)Three-way visual indication of protection status and advanced pre-failure warning so you need never be unprotectedESP XXX D1R or ESP XXX D1R/LCD units (where XXX = 208, or 415, or 480) have a remote display that allows the protector to be mounted close to the incoming feed or distribution board with the display being mounted in a visibleESP XXX D1/LCD or ESP XXX D1R/LCD units have backlit LCD intelligent display offering clear status information that can be rotated for side mounting to facilitate short connecting leadsRemote indication facility allows a pre-failure warning to be linked to a building management system, buzzer or lightChangeover active volt-free contact enables the protector to be used to warn of phase loss (i.e. power failure, blown fuses etc)Flashing warning of potentially fatal neutral to earth supply faults (due to incorrect earthing, wiring errors or unbalanced conditions)Through terminal facility allows series connection on low current supplies to eliminate high additive voltage associated with connecting leads on units installed in parallelCompact space saving DIN housing