Juice Pressure Transmitter Flat Membrane Pressure Transmitter Anti-clogging Diaphragm Gel Press Pressure Transducer IP65 SS316/304

Production process of pressure transmitter Component screening: A good pressure transmitter starts with components. From screening test to qualified employment, we check at every level to provide you with high-quality pressure transmitters. 6 times accuracy standard: Germany General Electric automatic calibration system is adopted. Each product has been accurately calibrated 6 times from production to delivery. Three-point detection of zero point, mid-point and full scale covers the full range, and the measurement accuracy is much higher than that of two-point calibration. High-temperature aging detection: high-temperature detection, aging detection, core body detection, component detection, finished product detection, and out-of-warehouse detection. Each pressure transmitter has undergone a 48-hour high temperature test. Nearly ten testing procedures ensure that each pressure transmitter is durable. Laser marking: Each pressure transmitter has a corresponding “identity number”. From production to testing, digital management. Range -100KPA…0～10KPA…60MPA Overload pressure 1.5 times the rated pressure Accuracy ±0.5%F.S/±1.0%F.S Stability <0.5%F.S/year Working temperature -20～ 85°C Storage temperature -40～ 100°C Measured medium Gas or liquid compatible with 304 and 316L stainless steel, fluorine rubber or nitrile rubber Electrical performance Two-wire Three-wire Three-wire Three-wire Four-wire Output signal 4-20mA 0.5-4.5V 0-5V 0-10V RS485 Power supply 10-30VDC 4.75-5.25VDC 10-30VDC 12-30VDC 10-30VDC Shell protection grade IP67, IP54 Pressure port M20*1.5, G1/2 Category: Pressure Transmitters Tags: Pressure Transducer, Pressure Transmitter