Pressure Transmitter Basic Model Single Crystal Silicon Transducer 4-20mA Differential Pressure Transducer Vapor Gas Liquid Pressure Transmitter

Considerations for pressure transmitter The suction pipe should be as short as possible and avoid sharp bending. The installation slope of the pressure pipeline should not be less than 1:12, so as not to cause precipitation. Before connecting the pressure pipeline to the pressure transmitter, it must be blown with compressed air and preferably washed with the measured medium. If the medium is liquid, the suction pipe should be completely emptied. The pressure pipeline shall be arranged in such a way that bubbles in the measured liquid or precipitates in the measured gas can flow back into the process pipeline. When installing process pipes, there must be no leakage. Product Name Basic single crystal silicon differential pressure transmitter Power supply 10.5V ~ 36V Ambient temperature -30 ~ 80°C Measurement media Vapor, liquid, steam (do not use for flammable and explosive media measurement) Signal output 4-20mA, HART Accuracy class 0.1%FS Stability 0.2%FS/ year Interface material Stainless steel Seal ring material Nitrile rubber (in contact with the measuring medium) Electrical connection M20*1.5 internal thread (with cable seal head)/NPT1/2 internal thread, suitable for 0.5-2.5mm2 wire Process connection M20×1.5 with welded pipe, 304 Triple valve group M20×1.5 with welded pipe, NPT1/4(F), 304 triple valve group NPT1/4(F), NPT1/2, NPT1/2(F), G1/2 with welded pipe, G1/4 Protection level lP67 Category: Pressure Transmitters Tags: 4-20mA, Pressure Transmitter, Single Crystal Silicon, Single Crystal Silicon Transducer, Transmitter